So your dream has come true and you have just had your asphalt driveway successfully installed? Don’t be overly excited as the crucial stage has just begun. While it is still fresh and new, an asphalt drive way is very sensitive and requires your utmost care. Below are some of the most crucial dos and don’ts you should observe if your driveway is made from asphalt in Bloomington, MN
Stay away from the driveway for the first three days after installation. You might be required to stay off longer in the hot season. Asphalt has a soft and proud nature and will get indented within the first years of installation if you walk on it or place sharp objects. Asphalt consists of certain oils which make it malleable thus easy to work with. The blacktop will remain soft for about one year until the oils evaporate.
While turning the car, make sure you do it slowly and ensure that the car is already in motion when you turn the wheels. Turning the wheels sharply causes the driveways surface to get bruised due to the grinding of the tires against the asphalt. The driveway is easily bruised if the oils in the asphalt have not yet evaporated. Driveways which are likely to get such damage are those located at right or tricky angles that the car must turn on its way out or in.
Avoid parking the car at one spot if your contractor has not assured you that the asphalt has completely dried. The vehicles weight might be too much and exerting this weight day in and day out on the same spot causes the driveway to have dents.
How easily the driveway cracks or gets dents will most likely depend on its thickness. Most domestic driveways are made to handle lightweight vehicles. If you allow heavy vehicles like trucks on your driveway it will crack from the heavy weight.
Asphalt driveways are among the best driveways and when well taken care of from the beginning, you will not think about re-installing a driveway for years. Visit professional contractors of asphalt in Bloomington.
