Simple Tips for Preventing a Wet Basement in Rockville

When water gets into a basement, the risk of mold and mildew greatly increases. Unfortunately, the low proximity of a basement makes it a prime target for flooding. There are many things a homeowner can do to help prevent a Wet Basement in Rockville.

Keep the Foundation Dry

Water can seep through even the tiniest cracks. Overtime, a wet foundation may lead to flooding problems in the basement. If the basement is unusually humid or already has signs of mold, there’s a good chance that water is coming in through the foundation.

To help keep the foundation dry, add drainage systems and downspouts that redirect water away from the area. The slope of the ground may need to be reconfigured if it curves towards the house. Consider painting the foundation with a waterproof sealant.

Properly Seal Exits

Even though most basements are underground, some basements have windows and doors leading into them. It’s important to make sure no water can enter through these areas. Armored Basement Waterproofing recommends adding weatherstripping around both windows and doors to stop water from getting inside.

Install a Sump Pump

A sump pump is a drainage system that collects excess water as it enters the basement. As the drain fills up, it is pumped out of the home. If the basement doesn’t already have a sump pump installed, consider adding one.

If there is a sump pump, make sure it’s running efficiently. It may be necessary to dig more trenches in the basement. This will ensure any water that enters the room is redirected to the sump pump.

Waterproof the Interior Walls

Even after taking steps to protect the exterior, don’t forget to also waterproof the interior walls. Paint all concrete and brick walls with a waterproof sealant. Once the sealant dries, water will not be able to enter the room. Sealants are also helpful for managing humidity levels in a basement.

No one wants a Wet Basement in Rockville. To prevent water from entering this space, be sure to keep the foundation dry, seal any exits, install a working sump pump and waterproof the interior. These waterproofing techniques will help prevent mold growth and flooding in the basement. Like us on Facebook.

Recent Articles

Categories

Archives

Similar Posts