Understanding Concrete Wedge Anchors

Understanding Concrete Wedge Anchors
There are a lot of different specialized types of fasteners on the market today. In construction and building companies and services, a common type of anchor found in most inventory rooms is a concrete wedge. The Look The unique look of concrete wedge anchors actually provides a very good visual of just how the anchor works inside the concrete wall, floor or ceiling. From the top, these anchors look like a standard bolt, although some have chamfering to allow for easy threading of the bolt. This is actually important as the head of the bolt may need to be tapped to get the anchor in place. The chamfering eliminates the risk of damage to the threads, allowing for easier starting of the nut. The bottom part of concrete wedge anchors look very different than other bolts or anchors. Typically, these are threaded about one-third to half way down the shaft. At that point, the threading ends and the shaft are unthreaded and tapers down, then expands at the end to the full diameter. Just above this is a collar, which sits between the bottom and the threaded area of the anchor. The Use To use concrete wedge anchors, drill a hole that is the diameter of the base of the anchor. The hole is then cleaned to remove dust, and concrete chips and the anchor is inserted into the hole. Threading the washer and nut on the end provides a surface to give the anchor a tap to fully seat it in the hole. Then, tighten the nut which will draw the base up to the bottom of the collar, forcing the collar to expand and wedge the anchor into the concrete. It is import to verify the anchor is fully set to the correct depth and in the correct location before tightening. Once these are installed, they cannot be removed from the concrete without breaking out the hole. Be the first to like. Like Unlike Share!...
read more

Heavy Duty Trucks and Jump Starts

Heavy Duty Trucks and Jump Starts
If you drive a large severe service truck, you’ll have to park it sometimes to make deliveries, take breaks, or for other reasons. Nothing is more irritating than returning to your vehicle and realizing that the battery is too low to start the engine. This can sometimes happen if you leave lights or other things on and forget about it. When this occurs, you probably don’t have to buy a new truck or check out heavy duty truck sales in Texas, just yet. In fact, you can usually get back on the road with a simple jump-start, but it’s important to know how to do it properly. Here are some tips on using your jump starter to make things easier. Proper Maintenance Just like vehicle batteries, you need to make sure that your jumper stays charged up. This is especially important during the coldest of weather. It doesn’t take long for cold temperatures to zap the charge in a battery. Store your jumper in an area that stays warm and dry all year-long. Buy the Right Model One of the best places to check out jumpers is a trusted dealer that specializes in heavy duty truck sales in Texas. They’ll make sure you have the right model for your truck. Ground Connections It’s not a good idea to connect the ground cable directly to the battery. You’ll need to connect the hot lead to the battery, and if you also connect the ground conductor to your battery, it may generate a spark. It doesn’t take much for some vehicle batteries to explode. This could cause serious burns and injuries because of the very strong acid inside the battery. Alternatives Check with a dealer that offers heavy duty truck sales in Texas. They may have a roadside assistance program that’s very affordable. This way, you won’t have to worry about jump starting your truck. Be the first to like. Like Unlike Share!...
read more

Common Services Provided By AA Plumbing In Cincinnati OH

Common Services Provided By AA Plumbing In Cincinnati OH
Individuals who need plumbing services want the very best and that’s why they call a professional company, such as AA Plumbing in Cincinnati OH. By contacting reliable and skilled plumbers, homeowners can hire the same company for all of their plumbing needs. Read the information below to learn about common services that are performed by experienced plumbers. Drain Cleaning A clogged drain is a common reason why many individuals contact a knowledgeable plumbing company. Drain clogs often occur due to foreign objects, food or grease buildup, and hair. When an individual can’t remove the clog with a plunger, it’s time to contact a professional. For food and hair clogs, a plumber will often use a tool called a drain auger that’s placed down into the drain to cut up the substances that are causing the blockage. If a foreign object is stuck in the drain pipes, the plumber will have to take the pipes apart to retrieve the object. Trenchless Pipe Relining Individuals who have a broken sewer pipe may want to consider the trenchless pipe relining option. Performed by a dependable plumbing company, this service allows the pipe to be repaired without digging up the yard. To complete this job, plumbing experts will dig a small opening in the ground to access the pipes for repair. This method is very reliable and there won’t be any upkeep required to maintain the new sewer pipes. Remodeling Services The rooms in a home that are frequently remodeled are the kitchen and bathroom. Since both of this room require a water source, a plumbing company, such as AA Plumbing in Cincinnati OH, is the perfect choice for the job. In addition to installing all of the plumbing pipes and fixtures, a qualified company can also install new floors, cabinets, appliances, showers and windows. Individuals who are interested in remodeling their kitchen or bathroom can contact a local company and request a free estimate. Individuals who need any type of residential or commercial plumbing services can contact the professionals at AA Plumbing. Visit the Website to contact the company for additional services including drain cleaning, trenchless pipe relining, and kitchen and bathroom remodeling. Be the first to like. Like Unlike Share!...
read more

Enjoy All the Colors of the Sea Right in Your Home with Aquariums in New York

Enjoy All the Colors of the Sea Right in Your Home with Aquariums in New York
A well-kept aquarium, much as an old family heirloom, is a thing to be proud of; besides that, it can provide years of pleasure to all who behold it. Exotic, brightly colored sea life will swim past admirers while children push their faces to the glass just to get a glimpse of that ever-elusive fish in the back of the tank. The joy and excitement of the ocean can be brought into your space in the form of aquariums in New York. Kept as either a centerpiece or a constant comfort in the background, these tanks of oceanic wonder can keep you mesmerized with their beauty. What Kind of Tank Is Right for You? Just as humans, fish come in all different shapes and sizes. In the same way, so do fish tanks. For a small desktop fish tank, a two- to five-gallon tank should suffice. This is enough tank space for a few smaller fish. If you are interested in more impressive aquariums, you should be looking for a tank that holds more than 200 gallons of water. As a rule of thumb, count on at least one gallon of water per every inch of fish that you want to have. Tanks come in many different shapes as well. There is the classic round fishbowl and the rectangular tank that is very common nowadays. There are also many tanks that are meant to be placed flush to a corner or wall. These come in pentagonal, hexagonal, cubic, bowfront, and quarter- and half-cylinder shapes. Ultimately, the style of tank that you decide to use will be decided by the aesthetic you want and the desired placement of your aquarium. Now That You’ve Decided on a Tank, it’s Time to Put Something in it! The most exciting part of preparing a fish tank is deciding what to put in it. You should research further about the different kinds of props that can go in a fish tank. Sunken ship themes are popular for bigger tanks while coral reef themes are popular for all tank sizes. Some themes will need more tank space to look pleasing. Keep in mind that this will be the home for your fish so when you are putting together your tank, make sure that you provide plenty of space for the fish! Now it’s time to add the fish! Make sure that your fish are compatible together before placing them in the tank. Some predatory fish might attack other fish, so it is important to choose which fish go in the same tank wisely. Ultimately, aquariums can be whatever you want them to be, so have fun with them! If you would like more information on creating and maintaining great aquariums, check out AquariusAquariums.net today! Be the first to like. Like Unlike Share!...
read more

Is There A Difference With Cold Formed Parts?

Is There A Difference With Cold Formed Parts?
Making shapes of metal, of the formation of parts and components, can be accomplished by at least three different methods. These four include hot forging, cold forming, and machining. Machining is the one option that creates the most waste and often is the most expensive and time-consuming. With machining, a solid workpiece is shaped, typically with CNC (computer numerical control) software to remove part of the solid form to create the shape. While highly precise, this method is not always the best option for all parts and all alloys and metals. Hot forging can include extrusions or working with metal that is heated to the point where it can be easily worked. This involves more energy expenditure than cold forming, plus it also requires additional time and equipment. Hot forging also can change the internal structure and physical properties of specific alloys, which needs to be carefully considered. Cold Forming Cold formed parts are made in a similar process to hot forging and extrusion, just without the need to heat the metal or alloy. Without the need for heating, this is a faster and less costly method and offers a waste-free option for creating simple to complex shapes for all types of applications. The benefit to choosing cold formed parts is that the system is fully automated and can produce high volumes of parts in a short period of time, keeping production costs down. As with hot forging through extrusion, the cold metal is forced through a die by using high-pressure rams. There are limitations as to the size of the component that can be formed based on the resistance of the metal or the alloy to the process. With cold formed parts, there is no change in the physical and internal properties of the metal. This means that parts don’t have to be stress relieved or further treated after fabrication, which is another important factor to consider for small or large volume production. Be the first to like. Like Unlike Share!...
read more

Why Use Industrial Ammonia Refrigeration Systems?

Why Use Industrial Ammonia Refrigeration Systems?
In many large facilities today, industrial ammonia refrigeration systems are common. You won’t see these systems in residential use and small commercial applications. Why is ammonia (R717) the preferred choice for large food processing companies, dairy, and cold storage services? Let’s look closer at the process to see. History R717 was one of the first refrigerants used. In the early days, even residential refrigerators used ammonia. It is one of the most efficient and effective refrigerants, but there is one main problem, especially with residential applications. If you have a leak in an R717 system, the gas can be toxic. Fumes can burn the eyes, lungs, and skin, so refrigerants like R22 were developed. Although they weren’t as efficient, the fumes were far less toxic. Yet, because R717 is so efficient, it’s still used in large industrial ammonia refrigeration systems. Good Things about R717 There are several benefits to using large ammonia cooling systems. Efficiency is important for large operations, and you can receive as much as ten percent more overall efficiency with an R717 system. Here are some more benefits: Cost – it’s cheaper to purchase R717 than halocarbon type refrigerants. Also, due to CFC concerns, R22 will no longer be available, and it’s being phased out. Replacements for R22 can be very expensive, and this makes the cost or R717 even more affordable and attractive to businesses. Higher heat transfer – this provides greater efficiency Smaller piping needed – this can save space and money on installation costs. Easy leak detection – strong fumes are easy to detect. Industrial Ammonia Refrigeration and the Environment If your business has environmental concerns, ammonia refrigerant is one of the best choices you can make. It breaks down in the atmosphere, and unlike CFC materials, it does no harm to the ozone layer. Be the first to like. Like Unlike Share!...
read more

How A Company That Offers Crate Packing Services Assists With Shipping Large Items

How A Company That Offers Crate Packing Services Assists With Shipping Large Items
Shipping companies have a wide array of requirements that must be met for an item to be shipped using their services, and one minor oversight can cause a package to be rejected. One of the best ways to combat this issue when shipping oversized and heavy items is to use a company that provides crate packing services in Dallas to ensure an item is properly packed and meets any business’s shipping requirements. Here is just a quick look at how they can make the process of packing large items as easy as possible. Custom Crate Fabricationa Many oversized items will not fit into a standard crate. A crate packing company can fabricate a custom wooden container that will be large enough to handle items of any size, including motorcycles, machinery equipment, and even antique furniture. A crate offers greater protection from damage than a standard cardboard box and can help make shipping items of any size or shape a straightforward process. Interior Support Once the crate is constructed, and the item is placed inside, it is then important to add blankets or bubble wrap to the product being shipped to provide additional protection and prevent the item from moving during transit. A company that provides packing services in Dallas will have the material on hand to ensure an item is packed securely and have the expertise to ensure any item will experience as little movement as possible. Movable Pallet Construction A crate should be built with a pallet bottom so the item can be easily moved using a pallet truck or forklift. This makes it simple to get the crate to its intended destination and can prevent the backbreaking work of having to move the item after it is unpacked. Using a crate that doesn’t have a pallet bottom can cause significant delays and cause the shipper to be charged excess fees by the shipping company. When it comes to packing large items, few methods are as convenient and affordable as custom crates. The team at Crate Master can build a custom wooden container that will make shipping anything as stress-free as possible. Contact them today to learn more and see how affordable packing large items should be. Be the first to like. Like Unlike Share!...
read more

Facts Concerning Day Care in Pittsburgh PA

Facts Concerning Day Care in Pittsburgh PA
Businesses who provide childcare services in their homes are not always licensed, but some are contracted by privately owned child care agencies. These providers can keep infants, toddlers or preschoolers. They can also keep children before and after school. However, finding the right day care in Pittsburgh, PA is much more than finding a nanny or babysitter. Check out the advantages of having reputable child care below. Home-based child care The benefits of licensed family child care include: • The homes in which these services are offered are regulated by government and inspected, and must meet specific standards • Brothers and sisters can be kept together • Children are in small groups • Child care agencies can provide professional development opportunities and support and supervision for child care staff Licensed childcare centers A day care in Pittsburgh, PA provides child care services for infants, toddlers, and school-aged children. These services include pre-kindergarten, full-time child care, extended child care, pre- and post-school programs. There may be child care centers in a variety of locations, including businesses, community centers, schools, or places of worship. Here are some advantages of this option: • These services are regulated and inspected by government officials • Children are in the company of other children their age • Staff include professionals trained in early childhood education • Each daycare is required to meet many standards • Children participate in activities adapted to the different stages of their development Government officials are there to routinely inspect child care centers at least once a year to ensure they meet provincial health, safety, and development standards. Pre-school and post-school child care services When there is sufficient demand, schools offering full-time classes also offer pre- and post-school programs. These learning-based programs complement the school day with a combination of discovery activities, free and directed activities, and quiet and outdoor games. School boards can offer pre- and post-school programs either directly or through licensed third-party providers who offer these programs in the school itself. Many of these programs are licensed, apart from some programs that are operated by school boards. Still can’t figure out which option suits you and your child best? If not, visit ABCsForChildren.com for more details. Be the first to like. Like Unlike Share!...
read more

Making Sure a House Guest Borrowing a Vehicle Is Covered by Auto Insurance in Kyle TX

Making Sure a House Guest Borrowing a Vehicle Is Covered by Auto Insurance in Kyle TX
When someone will be having a house guest for an extended period of time, many acts of courtesy can help make this person’s stay more pleasant. If the guest did not arrive with a vehicle, the hosts may like the idea of letting this person use one of their cars now and then. It’s important to check the policy for Auto Insurance in Kyle TX and find out whether that driver would be covered in case of an accident. If not, this might be a good time to do a little shopping around and see whether better coverage is offered by another insurer at an affordable price. Follow That Car In most cases, Auto Insurance in Kyle TX follows the car, not the driver. That’s helpful in a situation like that of a house guest being allowed to use a car while visiting. However, the vehicle owner must keep in mind that he or she would be liable if the guest causes a collision. Sufficient Liability Coverage This shouldn’t be a problem if the owner’s insurance policy has sufficient liability coverage in relation to the policyholder’s assets. One reason for having car insurance is to prevent the risk of a lawsuit and the possibility of losing real estate, boats and recreational vehicles, and retirement accounts. Uninsured Motorist Coverage Even if the house guest is a very safe driver and never causes an accident, this person can become involved in a collision caused by someone else. Normally, that driver’s policy would pay for liability costs, but not every driver follows the law and carries automotive insurance. The other person then must seek assistance from his or her own insurance company in the uninsured motorist part of the policy. Long-Term Use If it turns out the guest will be staying for a long time and continuing to drive the vehicle, the owner may consult with an agency such as Perdue Insurance Group about adding this person to the policy. Not all insurance companies allow this, but some of the most recognizable ones do. A regular user should be listed on the policy, or the insurer might deny any claim involving that individual. Be the first to like. Like Unlike Share!...
read more

A High-Quality Vacation Rental Provides Privacy And Homey Comfort

A High-Quality Vacation Rental Provides Privacy And Homey Comfort
During a vacation, one of the most important aspects to plan out is the question of where you are going to stay. The place you will stay in will depend on a variety of factors, such as where you plan on visiting in your chosen vacation destination, as well as the occasion for the trip and the amount of and ages of people you are traveling with. In some cases, getting a vacation rental is a better idea than, say, reserving a hotel room. A Vacation Rental Offers Ultimate Privacy If you like feeling like you have your own home to stay in while you are vacationing, then booking a vacation rental is the best idea. After you have spent a full, exciting day exploring your vacation destination, you can come back to your own private set of rooms. Because you basically have your own separate enclosed space with lots of room, a vacation rental is a good choice for occasions such as romantic getaways, family vacations, or trips with a group of your friends. Vacation Rentals Are Comfortable And Convenient If you want to prepare something simple to eat or drink, without leaving your vacation rental, then you will usually have at least a kitchenette to do it in. This is a good option for longer trips when you need to take a lot of things with you and therefore, need plenty of space. Special Vacation Rentals Are Homey And Unique In several vacation spots in the United States, such as Pigeon Forge and Gatlinburg, you can rent a rustic cabin to stay in. Renting and staying in a cabin gives you the wonderful and nostalgic feeling of being on a camping trip. There are lots of hidden gems when it comes to vacation rentals, so be sure to check out all the options before making your final decision! Be the first to like. Like Unlike Share!...
read more
Page 21 of 469« First...10...1920212223...304050...Last »